Order Products : sales@su-jiao.com
Grilon® XE 5004 (BM-30/2 UV)
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ugb49Q_Grilon-XE-5004-BM-30-2-UV-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilon® XE 5004 (BM-30/2 UV) is a Polyamide 66/6 Copolymer (Nylon 66/6) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilon® XE 5004 (BM-30/2 UV) are:
Typical applications include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.37 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 0.60 | -- | % | |
| Flow | 0.40 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 7.0 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.0 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 175 | 120 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 8500 | 3700 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 90.0 | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | 9.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 3.0 | 3.0 | kJ/m² | |
| 23°C | 4.0 | 6.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 30 | 30 | kJ/m² | |
| 23°C | 30 | 60 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 1.8 MPa, Unannealed | 155 | -- | °C | ISO 75-2/A |
| 8.0 MPa, Unannealed | 65.0 | -- | °C | ISO 75-2/C |
| Continuous Use Temperature | Internal Method | |||
| -- 1 | 80.0 to 110 | -- | °C | |
| -- 2 | 160 | -- | °C | |
| Melting Temperature 3 | 222 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 9.0E-5 | -- | cm/cm/°C | |
| Transverse | 9.0E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 34 | 30 | kV/mm | IEC 60243-1 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.800 mm) | HB | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA 6, MHLR, 14-190 N, MD 30 | -- | ISO 1874 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW1182 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
| Spartech Polycom SCR7-7015RF | Spartech Polycom | PC | Spartech |
| Zytel® BM70G20HSLX BK537 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| LUVOCOM® 1-8070 VP | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| UNITIKA Nylon 6 M1030E | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
