Order Products : sales@su-jiao.com
Andur 8 APFLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ugO5Hc_Andur-8-APFLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8-APF-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 8-APF-LM with polyols and their combination with Curene 442 and other diamines or by the use of plasticizers. The short pot life of Andur 8-APF-LM makes it ideal for machine casting. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 4700 | cP | ASTM D2393 |
| 100°C | 980 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 2.9 to 3.3%Specific Gravity, ASTM D792, 70°F: 1.16 g/mlSpecific Gravity, ASTM D792, 212°F: 1.14 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® SEG8 GY7716B | BASF Corporation | Nylon 6 | Ultramid® |
| UNITHENE® LH901 | USI Corporation | HDPE | UNITHENE® |
| BCC Resins BC 8086 | BCC Products Inc. | PUR, Unspecified | BCC Resins |
| COSMOLEX® FS250A | TPC, The Polyolefin Company (Singapore) Pte Ltd | LLDPE | COSMOLEX® |
| EPO-TEK® T7139 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
