Order Products : sales@su-jiao.com
Andur 9 APLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | udffYg_Andur-9-APLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 9-AP-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 88 to 91 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442, other diamines or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 2200 | cP | ASTM D2393 |
| 100°C | 600 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4 to 4.5%Specific Gravity, ASTM D792, 77°F: 1.21 g/mlSpecific Gravity, ASTM D792, 212°F: 1.18 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™ 3013A | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| NORYL™ 6850H resin | SABIC Innovative Plastics Europe | PPE+PS | NORYL™ |
| Devcon Plastic Welder™ | Devcon | Epoxy | Devcon |
| HiFill® PA6/6 GF/M40 HS L NAT | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LUVOCOM® 1/CF/15/TF/20/BK | LEHVOSS Group | Nylon 66 | LUVOCOM® |
