Order Products : sales@su-jiao.com
RAMLLOY PVB702
| Category: | ABS+Nylon , Acrylonitrile Butadiene Styrene + Nylon |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | RAMLLOY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uZIu1M_RAMLLOY-PVB702.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IMPACT MODIFIED, UV STABILIZED ABS/NYLON ALLOY FOR INJECTION MOLDING APPLICATIONS. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (250°C/5.0 kg) | 20 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | |||
| Flow | 0.80 to 1.0 | % | ASTM D955 |
| -- | 0.80 to 1.0 | % | ISO 2577 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.4 | % | ASTM D570, ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1700 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 35.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 30 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 1480 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 60.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 750 | J/m | ASTM D256 |
| 23°C | 60 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 80.0 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, Unannealed | 60.0 | °C | ASTM D648, ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Constant (1 MHz) | 3.00 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® S223-G4U | DSM Engineering Plastics | Nylon 66 | Akulon® |
| HOPELEX PCG-2105 | Lotte Chemical Corporation | PC | HOPELEX |
| LNP™ LUBRICOMP™ LL002 compound | SABIC Innovative Plastics | PEEK | LNP™ LUBRICOMP™ |
| Plenco 07556 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| MAXAMID™ RC6HSL-BK09 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
