Order Products : sales@su-jiao.com
Ferro PE JPE65HJ01BK
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uYhvNC_Ferro-PE-JPE65HJ01BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ferro PE JPE65HJ01BK is a linear low density polyethylene material, which contains a filler of 65% barium sulfate. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. The main characteristics of Ferro PE JPE65HJ01BK are: heat stabilizer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.84 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.5 | % | ASTM D955 |
| Transverse flow | 1.6 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 6.89 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 340 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% secant : 23°C | 186 | MPa | ASTM D790 |
| Tangent : 23°C | 200 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 5.34 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 340 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 460 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 21.1 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 19.4 | °C | ASTM D648 |
| Additional Information |
|---|
| Filler Content, ASTM D2584: 65% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResinDirect COPPI10 | ResinDirect | PP Impact Copolymer | ResinDirect |
| Moplen EP2S34F | Shazand (Arak) Petrochemical Corporation | PP Random Copolymer | Moplen |
| NaturePlast PHI 001 | NaturePlast | PHA | NaturePlast |
| Fainplast PVC PG 80 | Fainplast Compounds S.r.l | PVC+NBR | Fainplast PVC |
| EXTEM™ XH1015 resin | SABIC Innovative Plastics | PI, TP | EXTEM™ |
