Order Products : sales@su-jiao.com

NuSil MED2-6300

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uVeSgA_NuSil-MED2-6300.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Comments: HIGH PURITY, HIGH PENETRATION, FIRM COHESIVE GEL

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.

Comments: HIGH PURITY, HIGH PENETRATION, FIRM COHESIVE GEL

General Information
Features	Biocompatible Breathable High Purity Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Penetration Depth ¹	1.00	cm

Uncured Properties	Nominal Value	Unit
Density	0.978	g/cm³
Viscosity	1.0	Pa·s
Curing Time (140°C)	5.0	hr

Note Message
1 .	Shaft weight/foot diameter/time : 19.5g/6.35mm/15s

Resin Grade	Manufacturer	Category	Trademark
Rilsan® Fine Powders T WHITE 750	Arkema	Nylon 11	Rilsan® Fine Powders
VALOX™ SHF4910 resin	SABIC Innovative Plastics Europe	PBT	VALOX™
HOPELEX PCG-2105	Lotte Chemical Corporation	PC	HOPELEX
POLYfill PP HIP8040 VT2	Polykemi AB	PP, Unspecified	POLYfill
Eleme NGL010FY	Eleme Petrochemical Company Ltd	LLDPE	Eleme