Order Products : sales@su-jiao.com
Lupox® SG3250
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Lupox® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uV7L37_Lupox-SG3250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description Good Surface Application Automotive (Head Lamp Bezel) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (265°C/2.16 kg) | 41 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 1.2 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.060 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 3.20 mm) | 53.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.20 mm) | 2.1 | % | ASTM D638 |
| Flexural Modulus 3(6.40 mm) | 5100 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, 6.40 mm) | 90.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.40 mm) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.40 mm | 205 | °C | |
| 1.8 MPa, Unannealed, 6.40 mm | 105 | °C | |
| Peak Melting Temperature | 223 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 to 5.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 245 to 255 | °C | |
| Middle Temperature | 250 to 260 | °C | |
| Front Temperature | 255 to 265 | °C | |
| Nozzle Temperature | 255 to 265 | °C | |
| Processing (Melt) Temp | 255 to 265 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 MV HI H K1416 | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Viprene™ P55D-22U-BLK | Alliance Polymers & Services | TPV | Viprene™ |
| Ad-Tech Epoxy ELB-338 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| CERTENE™ LLBF-220C | Muehlstein | LLDPE | CERTENE™ |
| LNP™ THERMOCOMP™ DF0046P compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
