Order Products : sales@su-jiao.com
KEBAFLEX® P D55.1
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | BARLOG plastics GmbH |
| Trademark: | KEBAFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uSghxG_KEBAFLEX-P-D55-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyester-Elastomer, Shore D55 |
| General Information | |
|---|---|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.2 | % | |
| Flow | 1.2 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 35.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 600 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | No Break | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 70.0 | °C | ISO 75-2/B |
| Melting Temperature 1 | 200 | °C | ISO 11357-3 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| FLEXAREN® 18000 | Innospec Leuna GmbH | EVA | FLEXAREN® |
| LNP™ LUBRICOMP™ IFL36R compound | SABIC Innovative Plastics Europe | Nylon 612 | LNP™ LUBRICOMP™ |
| OmniLon™ PA6/6 IM8 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| TORZEN® G2500HS1L NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| LEXAN™ 243R resin | SABIC Innovative Plastics | PC | LEXAN™ |
