Order Products : sales@su-jiao.com

Tempalux® 5000

Category:	PEI , Polyether Imide
Manufacturer:	Westlake Plastics Company
Trademark:	Tempalux®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uMCq8y_Tempalux-5000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

An amorphous thermoplastic polyetherimide, stock shapes from ULTEM ® resin possess a combination of useful characteristics, including high heat resistance, high strength at elevated temperatures, high modulus, and broad chemical resistance. Tempalux stock shapes are inherently flame resistant with low smoke emission. Tempalux stock shapes display property retention and resistance to environmental stress cracking when exposed to a wide variety of chemicals. The standard color of Tempalux stock shapes is light amber.

Applications Include:

Medical instument trays

Burn-in test sockets

Aircraft / Aerospace interiors

Connectors

Automotive components

Valves, electrical fittings

Food Service (ovenable)

Flex Circuits

Advantages of Tempalux 5000:

Inherent flame resistance

Extremely low NBS smoke evolution

Superior limiting oxygen index

Exceptional tensile and flexural strength

Broad chemical resistance

UV stable - inherently

FDA compliant

General Information
Features	Amorphous Flame Retardant Food Contact Acceptable Good Chemical Resistance Good UV Resistance High ESCR (Stress Crack Resist.) High Heat Resistance High Temperature Strength High Tensile Strength Low Smoke Emission
Uses	Aerospace Applications Aircraft Applications Automotive Applications Connectors Electrical Parts Medical/Healthcare Applications Non-specific Food Applications Valves/Valve Parts
Agency Ratings	FDA Unspecified Rating
Appearance	Amber
Forms	Film Rod Sheet Slab

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.30	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (367°C/6.6 kg)	13	g/10 min	ASTM D1238
Molding Shrinkage			ASTM D955
Flow : 3.20 mm	0.50 to 0.70	%
Across Flow : 3.20 mm	0.50 to 0.70	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3520	MPa	ASTM D638
Tensile Strength			ASTM D638
Yield	96.5	MPa
Break	96.5	MPa
Tensile Elongation			ASTM D638
Yield	6.0	%
Break	25	%
Flexural Modulus (50.0 mm Span)	3170	MPa	ASTM D790
Flexural Strength			ASTM D790
Yield, 100 mm Span	155	MPa
Break, 50.0 mm Span	159	MPa

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-30°C	74	J/m
23°C	69	J/m
Unnotched Izod Impact (23°C)	No Break		ASTM D256
Instrumented Dart Impact (23°C)	33.9	J	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed, 6.40 mm	237	°C
1.8 MPa, Unannealed, 3.20 mm	217	°C
1.8 MPa, Unannealed, 6.40 mm	230	°C
Vicat Softening Temperature	242	°C	ASTM D1525 ¹
CLTE			ASTM E831
Flow : -40 to 150°C	5.0E-5	cm/cm/°C
Transverse : -40 to 150°C	5.0E-5	cm/cm/°C
Thermal Conductivity	0.22	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength (3.20 mm, In Oil)	17	kV/mm	ASTM D149

Optical	Nominal Value	Unit	Test Method
Transmittance	58.0	%	ASTM D1003
Haze	2.0	%	ASTM D1003

Note Message
1 .	Rate B (120°C/h), Loading 2 (50 N)

Resin Grade	Manufacturer	Category	Trademark
StarFlex P 7145-1000	STAR Thermoplastic Alloys & Rubbers, Inc.	TPE	Starflex
UBE Polyethylene R500	UBE America, Inc.	PE, Unspecified	UBE Polyethylene
ACCUTECH™ HP0334C10L1	ACLO Compounders Inc.	PP Homopolymer	ACCUTECH™
Ebalta BIV 800 / BIV 60-1	Ebalta Kunststoff GmbH	Epoxy	Ebalta
Optix® CA-990	Plaskolite West, Inc.	Acrylic (PMMA)	Optix®