Order Products : sales@su-jiao.com
Bayflex® 110-35
| Category: | PUR-Ether/MDI , Polyurethane (Polyether, MDI) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Bayflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uLxSds_Bayflex-110-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bayflex 110-35 system produces a solid urethane elastomer which has a flexural modulus of approximately 33,500 psi at room temperature. This system is used to produce large reaction injection molding (RIM) parts, such as automotive fascias. The system combines rapid demold times, excellent integrity at demold, and outstanding physical properties. Bayflex 110-35 is a formulated RIM system supplied as two liquid components. Component A is a diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. As with any product, use of the Bayflex 110-35 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D1622 |
| Molding Shrinkage - Flow (3.81 mm) | 0.56 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.81 mm) | 13.4 | MPa | ASTM D412 |
| Tensile Strength (Break, 3.81 mm) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.81 mm) | 220 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| -30°C, 3.81 mm | 469 | MPa | ASTM D790 |
| 23°C, 3.81 mm | 231 | MPa | ASTM D790 |
| 65°C, 3.81 mm | 134 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1(3.81 mm) | 61.3 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.81 mm) | 270 | J/m | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components 2 | |||
| Component a | Mixing ratio by weight: 53 | ||
| Component B | Mixing ratio by weight: 100 | ||
| Demold Time | 0.50 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Sag 3 | ASTM D3769 | ||
| 4 in Overhang : 121°C, 3.81 mm | 3.81 | mm | ASTM D3769 |
| 6 in Overhang : 121°C, 3.81 mm | 16.5 | mm | ASTM D3769 |
| Part A Type: Isocyanate Appearance: Light yellow to yellow liquid Specific Gravity @ 25°C: 1.21 Viscosity @25°C: 700 mPa-s Flash Point PMCC: 213 °C Part B Type: Polyol Appearance: Light brown to pale tan liquid Specific Gravity @ 25°C: 1.03 Viscosity @25°C: 1300 mPa-s Flash Point PMCC: 149 °C Molding Parameters Material Temperature - Component A: 38 °C Material Temperature - Component B: 43 to 49 °C Mold Temperature: 66 °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | 105 Index |
| 3 . | 1 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4702 | RTP Company | PTT | RTP |
| Resilience™ HC 8210 | PolyOne Corporation | PVC, Rigid | Resilience™ |
| Amilan® CM1061 | Toray Resin Company | Nylon 6 | Amilan® |
| Petrothene® NA443023 (Cast) | LyondellBasell Industries | LDPE+EVA | Petrothene® |
| Piolen® P T40A19 | PiO Kunststoffe GmbH & Co KG | PP Homopolymer | Piolen® P |
