Order Products : sales@su-jiao.com
Lucent PA G66-13
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Lucent PA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uKsifF_Lucent-PA-G66-13.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
13% Glass Fiber Reinforced, Nylon 66 Colors Available Add "H" for Heat Stabilized Add "HU" for Weatherable Typical Properties, Dry as Molded |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.70 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 4480 | MPa | ASTM D790 |
| Flexural Strength | 159 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 232 | °C | ASTM D648 |
| Peak Melting Temperature | 250 to 265 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 7470M | Formosa Plastics Corporation | EVA | TAISOX |
| VECTOR® 2518LD | Dexco Polymers LP | SBS | VECTOR® |
| Elastron® V P.V101.A80.B | Elastron USA, Inc. | TPV | Elastron® V |
| KOCETAL® CB301 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Jamplast Inj-07 ABS | Jamplast, Inc. | ABS | Jamplast |
