Order Products : sales@su-jiao.com
Mecoline S TP 1006 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uG87bO_Mecoline-S-TP-1006-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, thermoplastic, highly flame retardant compound for the sheathing of low and medium voltage cables in General Installation applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.56 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (160°C/21.6 kg) | 5.0 | g/10 min | ISO 1133 |
| pH | > 4.5 | DIN VDE 0472 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - penetration 6h at 90°C | 27 | % | DIN VDE 0472 |
| Temperature Index | 280 | °C | ASTM D2863 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 10.0 | µS/mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 140 to 160 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 50 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.3 | MPa | IEC 811-1-1 |
| Tensile Strain (Break) | 180 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | IEC 811-1-2 | ||
| 100°C, 240 hr | -9.7 | % | |
| 120°C, 168 hr | 1.9 | % | |
| Change in Tensile Strain at Break in Air | IEC 811-1-2 | ||
| 100°C, 240 hr | 11 | % | |
| 120°C, 168 hr | 11 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 1 | > 1.0E+12 | ohms | DIN VDE 0303 |
| Volume Resistivity 2 | > 1.0E+12 | ohms·cm | DIN VDE 0303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 45 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 to 130 | °C | |
| Cylinder Zone 2 Temp. | 115 to 135 | °C | |
| Cylinder Zone 3 Temp. | 120 to 140 | °C | |
| Cylinder Zone 4 Temp. | 125 to 145 | °C | |
| Cylinder Zone 5 Temp. | 130 to 150 | °C | |
| Adapter Temperature | 135 to 155 | °C | |
| Die Temperature | 150 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | 16h at 20°C, 500V |
| 2 . | 16h at 20°C, 500V |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCUCOMP™ ABS803L | ACLO Compounders Inc. | ABS | ACCUCOMP™ |
| Braskem PP H 118 | Braskem | PP Homopolymer | Braskem PP |
| Lifoflex® UV FLAM 40600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| Petro Rabigh PE M8060U | Rabigh Refining & Petrochemical Co. | HDPE | Petro Rabigh PE |
| Plavis® C | Comco Nylon GmbH | PI, TP | Plavis® |
