Order Products : sales@su-jiao.com
Andur 70 DP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uFGLzD_Andur-70-DP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 70-DP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 70 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 71 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 29.2 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 57.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 83 | % | ASTM D412 |
| Compression Set | 33 | % | ASTM D395B |
| Bayshore Resilience | 45 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 1.0 - 1.5 | min | |
| Demold Time (100°C) | 15 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 68 to 73Die C Tear, ASTM D1004: 976 pliAverage Split Tear, ASTM D1938: 319 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 70-DP: 180-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ateva® 1941 | Celanese EVA Performance Polymers | EVA | Ateva® |
| Ferro PP TPP20AC06HB | Ferro Corporation | PP Homopolymer | Ferro PP |
| Geon™ HTX 92052 | PolyOne Corporation | PVC Alloy | Geon™ HTX |
| Elvakon® 4494 | Lucite International Inc. | Acrylic (PMMA) | Elvakon® |
| LNP™ THERMOCOMP™ LF005 compound | SABIC Innovative Plastics | PEEK | LNP™ THERMOCOMP™ |
