Order Products : sales@su-jiao.com

Silopren® LSR 4020

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Silopren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uD6oGR_Silopren-LSR-4020.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Silopren LSR 4020 TP 3364 is a two-component liquid silicone rubber for injection moulding processes. Silopren LSR 4020 TP 3364 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.

Key Features and Benefits
Vulcanizates consisting of Silopren LSR 4020 TP 3364 are distinguished by the following properties:

excellent biocompatibility

high stability to ozone and ultraviolet light

neutral odour and taste

sterilisable with ethylene oxide, steam and gamma radiation

good transparency

high thermal stability

high recovery after puncture

easy pigmentable with the LSR Colour Pastes.

Potential Applications
Because of the outstanding properties Silopren LSR 4020 TP 3364 is particularly suitable for the following elastomeric articles: sealing elements, catheters, vibration dampers, tube connectors, parts for medical technical equipment, mats

General Information
Features	Biocompatible Ethylene Oxide Sterilizable Good Colorability Good Thermal Stability Good UV Resistance High Clarity Low to No Odor Low to No Taste Ozone Resistant Radiation Sterilizable Steam Sterilizable Vibration Damping
Uses	Connectors Medical/Healthcare Applications Seals
Appearance	Clear/Transparent
Forms	Liquid
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.08	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	22		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	6.50	MPa	DIN 53504
Tensile Elongation (Break)	1000	%	DIN 53504
Tear Strength ¹	15.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	20	%	DIN 53517

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit	Test Method
Vulcanization (175°C)	10.0	min

Uncured Properties	Nominal Value	Unit	Test Method
Color
-- ²	Translucent
-- ³	Translucent
Viscosity			DIN 53018
20°C ⁴	200	Pa·s
20°C ⁵	200	Pa·s
Pot Life (20°C)	4300	min

Note Message
1 .	Die B
2 .	Part B
3 .	Part A
4 .	Part B
5 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Teflon® PFA 440HPA	DuPont Fluoropolymers	PFA	Teflon® PFA
WELLAMID Nylon 6000 CFGV 15/15 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 6	WELLAMID Nylon
NANTEX® 630N	Nantex Industry Co., Ltd.	NBR	NANTEX®
POLYfill PP CIP1001F	Polykemi AB	PP, Unspecified	POLYfill
Dynalloy™ GP 7810-40T	PolyOne Corporation	TPE	Dynalloy™