Order Products : sales@su-jiao.com
Telcar® TL-2530F
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uC5rbr_Telcar-TL-2530F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Telcar TL-2530F is a general purpose, high density thermoplastic elastomer designed for injection molding applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 1.2 | % | ISO 294-4 |
| Flow direction | 1.7 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 1 sec | 32 | ASTM D2240 | |
| Shaw A, 5 seconds | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 3.45 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 780 | % | ASTM D412 |
| Tear Strength 1 | ASTM D624 | ||
| Transverse flow | 14.0 | kN/m | ASTM D624 |
| Flow | 16.6 | kN/m | ASTM D624 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 12 | % | ISO 815 |
| 70°C, 22 hr | 41 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 193 | °C | |
| Middle Temperature | 177 - 199 | °C | |
| Front Temperature | 182 - 204 | °C | |
| Nozzle Temperature | 188 - 210 | °C | |
| Processing (Melt) Temp | 188 - 210 | °C | |
| Mold Temperature | 25.0 - 65.6 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 - 188 | °C | |
| Cylinder Zone 2 Temp. | 171 - 193 | °C | |
| Cylinder Zone 3 Temp. | 177 - 199 | °C | |
| Cylinder Zone 5 Temp. | 182 - 204 | °C | |
| Die Temperature | 190 - 210 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Note Message | |
|---|---|
| 1 . | C mold, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2800 B-85A | RTP Company | TPV | RTP |
| XANTAR® C CF 407 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
| AT 418 | Celanese EVA Performance Polymers | LDPE | AT |
| CELEX™ 500S2 | Trinseo | PC+ABS | CELEX™ |
| Grilon® F 47 H NL nat 6020 | EMS-GRIVORY | Nylon 6 | Grilon® |
