Order Products : sales@su-jiao.com
Generic Alkyd - Glass Fiber
| Category: | Alkyd , Alkyd |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u9kOfQ_Generic-Alkyd---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Alkyd - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.09 to 2.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.30 to 0.45 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.050 to 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 60 to 65 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength (Yield, 23°C) | 82.7 to 105 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 124 to 159 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 77 to 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 232 to 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 12 to 13 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 5.98 to 7.30 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.010 to 0.070 | ASTM D150 | |
| Arc Resistance | 180 to 186 | sec | ASTM D495 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 P2 MI | NUREL, S.A. | Nylon 6 | Promyde® |
| TEREZ PA 6 7500 GF 30 FL HF /2 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Devcon Aluminum Liquid (F-2) | Devcon | Epoxy | Devcon |
| INSPIRE™ 137 (Blow Molding Extrusion) | Braskem Europe GmbH | PP, Unspecified | INSPIRE™ |
| Dow Corning® MG 7-9900 | Dow Corning Corporation | Silicone | Dow Corning® |
