Order Products : sales@su-jiao.com
FRAGOM PR/112 UTW
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u9LAvd_FRAGOM-PR-112-UTW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM: is the trade-mark of our flame retardant polyolefinic compounds FRAGOM PR PR/112 UTW: ow halogen flame-retardant thermoplastic compound suitable for UTW automotive cables insulation. Exercise temperature: - 40 +125°C Certify: LV112, ISO 6722 C, FIAT 7.Z8220,9.91107 T3 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/21.6 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 19.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 250 | % | IEC 60811 |
| Abrasion Resistance 1(250.0 µm) | > 2.0E+2 | Cycles |
| Aging | Nominal Value | Test Method | |
|---|---|---|---|
| Heat Aging - 240 hr (150°C) | No Crack | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | % | IEC 60754-1 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Mandrel Test - 6 hr (175°C) | No Crack |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 210 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 27 | % | ASTM D2863 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| No detrimental effects on properties and capability of FRAGOM in presence of convenient Masterbatch colours, black included. We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 120 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 175 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Die Temperature | 225 | °C |
| Note Message | |
|---|---|
| 1 . | 0.35mm² Size |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SuperLite® SL551600-100 (5.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| STYRON™ 414 | Americas Styrenics LLC | PS (HIPS) | STYRON™ |
| UNISOFT ADHESION™ AD-55A-NT-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT ADHESION™ |
| ARMAMID® PA MN 40-1 | Poly Plastic | Nylon 6 | ARMAMID® |
| PLUSTEK PB340S50 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
