Order Products : sales@su-jiao.com
Kemcor HD 1155
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u1dkLh_Kemcor-HD-1155.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin meets the requirements for unrestricted food contact specified in AS 2070 Part 1 (1992). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.040 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.5 to 3.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 600 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 25.0 | MPa | |
| Break | 26.0 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Flexural Modulus | 920 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 | °C | |
| Injection Pressure | 14.0 | MPa | |
| Screw Speed | 48 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nordbak Trowel Mix | Loctite® | Epoxy | Nordbak |
| Ferro PP LPP26BC63UL-BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| DURAFIDE® 6150T6 | Polyplastics Co., Ltd. | PPS | DURAFIDE® |
| ELASTOSIL® N 291 | Wacker Chemie AG | Silicone | ELASTOSIL® N |
| LUVOCOM® 1-7139 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
