Order Products : sales@su-jiao.com
KOPEL® KP3363
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u0oW1n_KOPEL-KP3363.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3363 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 36 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 36.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 620 | % | ASTM D638 |
| Flexural Modulus (23°C) | 437 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 7.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | 120 | J/m | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 120 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Peak Melting Temperature | 210 | °C | ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Resilience | 43 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® AESN EP 076 TL | Arkema | Nylon 12 | Rilsan® |
| REVOLVE® M-719 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| HiFill® TPU 0266 A | Techmer Engineered Solutions | TPU, Unspecified | HiFill® |
| INSULCAST® 116 FR | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Catalyst CT/7-LR UV LB | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
