Order Products : sales@su-jiao.com
NILFLEX® SH A0 MN001
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Taro Plast S.p.A. |
| Trademark: | NILFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tzQZFZ_NILFLEX-SH-A0-MN001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SEBS elastomer is the main consituent of these TPE-S (Thermoplastic Elastomer Styrenic) compounds. These compounds show high UV and ozone resistance. Nilflex SH is totally recyclable and it can be produced in standard grades and in tailor-made grades. Available in n atural, black and colored grade. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.870 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 380 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 0 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain | 0.0900 | MPa | |
| 300% Strain | 0.150 | MPa | |
| Tensile Strength 2(Break) | 2.35 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 1300 | % | ASTM D412 |
| Tear Strength | 10.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 110 to 160 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® VPA760 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PE/PCTFE | TEKNIFLEX® |
| Starex LH-0300 | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Trilliant™ HC THC-01-AS149031 Trans Blue | PolyOne Corporation | ABS | Trilliant™ HC |
| Alkatuff® 438 | Qenos Pty Ltd | LLDPE | Alkatuff® |
| Garaflex™ 131-T NAT | AlphaGary | PVC+NBR | Garaflex™ |
