Order Products : sales@su-jiao.com

megol® TA 40

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	API SpA
Trademark:	megol®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tyX4Bv_megol-TA-40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

megol® TA 40 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It can be processed by injection molding and is available in Europe.

Characteristics include:

Chemical Resistant

Eco-Friendly/Green

Fast Molding Cycle

Food Contact Acceptable

Good Processability

General Information
Features	Acid Resistant Base Resistant Detergent Resistant Fast Molding Cycle Food Contact Acceptable Good Chemical Resistance Good Processability Good UV Resistance Good Weather Resistance High Heat Resistance Low Temperature Resistant Ozone Resistant Recyclable Material
Appearance	Clear/Transparent
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.880	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 15 sec)	40		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
--	6.00	MPa
100% Strain	1.10	MPa
300% Strain	1.90	MPa
Tensile Elongation (Break)	700	%	ASTM D638

Elastomers	Nominal Value	Unit	Test Method
Tear Strength ¹	22.0	kN/m	ASTM D624

Additional Information	Nominal Value
Ozone Resistance ²(40°C)	Excellent

Note Message
1 .	Without Notch
2 .	72 hr, 200 ppcm, Tension=20%

Resin Grade	Manufacturer	Category	Trademark
Topilene® J440F	Hyosung Corporation	PP Impact Copolymer	Topilene®
Fiberfil® J-60/20/E8	Fiberfil® Engineered Plastics Inc.	PP Homopolymer	Fiberfil®
Kingfa API-2208	Kingfa	PP, Unspecified	Kingfa
INSPIRE™ 137 (Blow Molding Extrusion)	Braskem Europe GmbH	PP, Unspecified	INSPIRE™
Sylvin 8980-95 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin