Order Products : sales@su-jiao.com
PPR PS02
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Premier Plastic Resins, Inc. |
| Trademark: | PPR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tvDDmB_PPRPS02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPR PS02 is a high impact polystyrene product, which contains a 20% filler. It is available in North America. The main characteristics are: impact resistance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.4 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 2070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 78.9 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 68 - 74 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 204 - 260 | °C | |
| Middle Temperature | 232 - 266 | °C | |
| Front Temperature | 232 - 266 | °C | |
| Nozzle Temperature | 238 - 260 | °C | |
| Processing (Melt) Temp | 227 - 277 | °C | |
| Mold Temperature | 38 - 77 | °C | |
| Injection Pressure | 55.2 - 552 | MPa | |
| Injection Rate | Moderate | ||
| Holding Pressure | 41.4 - 414 | MPa | |
| Back Pressure | 0.0689 - 3.45 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Screw Speed: Slow to ModerateDecompression: .15 to .30 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® G AST natural | Röchling Engineering Plastics SE & Co. KG | HDPE | POLYSTONE® |
| Tru-Bond™ PB 950 | Devcon | Acrylic, Unspecified | Tru-Bond™ |
| Cytec VTF266 | Cytec Industries Inc. | Epoxy | Cytec |
| Jackdaw ABS/PC FX10BK6455 | Jackdaw Polymers | PC+ABS | Jackdaw ABS/PC |
| LUVOCOM® 50/TF/15/BK-1 | Lehmann & Voss & Co. | PC | LUVOCOM® |
