Order Products : sales@su-jiao.com
Grilamid® LV-30H V0
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tt6HU8_GrilamidLV30HV0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid®LV-30H V0 is a polyamide 12 (nylon 12) material, and the filler is 30% glass fiber reinforced material. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Grilamid®The main features of LV-30H V0 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.22 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.70 | -- | % | ISO 294-4 |
| Flow | 0.10 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 1.4 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.60 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 170 | 145 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 10000 | 9000 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 95.0 | 75.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.5 | 2.5 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 8.0 | 8.0 | kJ/m² | ISO 179/1eA |
| 23°C | 9.0 | 9.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 35 | 35 | kJ/m² | ISO 179/1eU |
| 23°C | 35 | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 1.8 MPa, not annealed | 160 | -- | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 105 | -- | °C | ISO 75-2/C |
| Continuous Use Temperature 1 | 90.0 - 120 | -- | °C | ISO 2578 |
| Melting Temperature 2 | 178 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow | 2.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 9.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Strength | 44 | 43 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.40 mm) | V-0 | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA12,GF30 FR,M1HLF2R,C18-100N | -- | ISO 16396 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide PF003IX1 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| EXCELINK 2600B | JSR Corporation | TPV | EXCELINK |
| Durez® 31513 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| ENFLEX VU-420-60A | Ravago Group | PP+EPDM | ENFLEX |
| Petroquim PP PH 0130 | Petroquim S.A. | PP Homopolymer | Petroquim PP |
