Order Products : sales@su-jiao.com
HYDEL® PC-7
| Category: | PC , Polycarbonate |
| Manufacturer: | Ensinger Inc. |
| Trademark: | HYDEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tscb4y_HYDEL-PC-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hydel®PC-7 ESD Polycarbonate is a static dissipative thermoplastic product containing graphic Fibril™ nanotubes. Unlike conventional carbon fibers, this technology allows for good dimensional stability after machining, outstanding toughness, consistent electrical properties, excellent surface quality, and minimal sloughing. Hydel®PC-7 is available in rod, slab, tubular bar, and profiles. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, 23°C) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2300 | MPa | ASTM D638 |
| Tensile Strength (Break) | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength | 74.5 | MPa | ASTM D790 |
| Compressive Strength | 84.8 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 138 | °C | ASTM D648 |
| Continuous Use Temperature | 127 | °C | |
| CLTE - Flow (-54 to 121°C) | 6.7E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay | 20 | msec | FTMS 101C 4046.1 |
| Surface Resistance 1 | |||
| @ 100V | 1.0E+7 - 1.0E+9 | ohms | |
| @ 10V | 1.0E+7 - 1.0E+10 | ohms | |
| Volume Resistance 2 | |||
| @ 100V | 1.0E+7 - 1.0E+9 | ohms | |
| @ 10V | 1.0E+7 - 1.0E+10 | ohms |
| Additional Information |
|---|
| Residual Voltage: 0VData obtained from extruded shapes material. |
| Note Message | |
|---|---|
| 1 . | EOS/ESD S11.11 |
| 2 . | ESD-STM 11.12 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-7022U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| TECHNYL® A 218 S40 BLACK 21 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Softflex® 8795 | Network Polymers, Inc. | TPE | Softflex® |
| BP Flex D 4107 CU BLK | Buckeye Polymers, Inc. | TPO | BP Flex |
| Clariant Nylon 6/6 6642-L | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
