Order Products : sales@su-jiao.com
Keyflex® BT 3038D
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Keyflex® BT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ts8C4Q_Keyflex-BT-3038D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description Fast Molding, Low Modulus Application Automotive Interior, Soft Touch Grips |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 23°C, Injection Molded | 80 | ||
| Shore D, 23°C, Injection Molded | 36 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C, 2.00 mm, Injection Molded) | 20.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, 2.00 mm, Injection Molded) | 700 | % | ASTM D638 |
| Flexural Modulus 3(6.40 mm) | 58.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 6.40 mm, Injection Molded | No Break | ||
| 23°C, 6.40 mm, Injection Molded | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 205 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.010 | % | |
| Rear Temperature | 205 to 225 | °C | |
| Middle Temperature | 215 to 235 | °C | |
| Front Temperature | 220 to 240 | °C | |
| Nozzle Temperature | 220 to 240 | °C | |
| Processing (Melt) Temp | 205 to 235 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.010 | % | |
| Cylinder Zone 1 Temp. | 205 to 225 | °C | |
| Cylinder Zone 2 Temp. | 210 to 230 | °C | |
| Cylinder Zone 3 Temp. | 215 to 235 | °C | |
| Cylinder Zone 4 Temp. | 215 to 235 | °C | |
| Adapter Temperature | 215 to 235 | °C | |
| Melt Temperature | 205 to 235 | °C | |
| Die Temperature | 205 to 245 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 15 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PA6 EN230 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 6 | Sunny® |
| Thermylene® P6-30FG-0600R | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| Vydyne® 88X-D | Ascend Performance Materials Operations LLC | Nylon 66/6 | Vydyne® |
| DOW™ Electrical & Telecommunications HFDK-0587 BK A | The Dow Chemical Company | PE Copolymer | DOW™ Electrical & Telecommunications |
| Kuraray Poval® PVA 420H | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
