Order Products : sales@su-jiao.com
HiPrene® MR71E
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | GS Caltex |
| Trademark: | HiPrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | trd02v_HiPrene-MR71E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HiPrene® MR71E is a high melt flow, 15% mineral filled polypropylene compound. The grade has been specifically designed for moulding large complex parts that require high impact strength as well as good stiffness. This product is paintable. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) 1 | 42 | g/10 min | ISO 1133 |
| Ash Content (600°C) | 13 to 17 | % | ISO 3451-1A |
| Volatile Matter | < 0.12 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 15.0 | MPa | ISO 527-2/1A/50 |
| Nominal Tensile Strain at Break | 25 | % | ISO 527-2/1A/50 |
| Flexural Modulus | 1300 | MPa | ISO 178/B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 35 | kJ/m² | ISO 180/A |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Talcoprene® 540TC NAT | SO.F.TER. SPA | PP Homopolymer | Talcoprene® |
| Adell Polyamide AN-38 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Argyle ABS (P400) | Argyle Materials Inc. | ABS | Argyle |
| Axiall PVC 9113 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| DynaStat® 257M2 | Polymer Dynamix | PE, Unspecified | DynaStat® |
