Order Products : sales@su-jiao.com
Moplen EP440M
| Category: | PP, High Crystal , High Crystallinity Polypropylene |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tpQC98_Moplen-EP440M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Moplen EP440M is the high isotacticity polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP440M is a block copolymer is typically used by customers for injection molding of battery case. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 97 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 27.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1180 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, Injection Molded | 39 | J/m | |
| 23°C, Injection Molded | 98 | J/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Network Polymers PS CPS 80 0800 | Network Polymers, Inc. | PS (GPPS) | Network Polymers PS |
| NuSil MED-4905 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Boda BDF25CP | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| APEX® 96-A0914M-90 | Teknor Apex Company | PVC, Flexible | APEX® |
| LUVOCOM® 1200-7116-1 | Lehmann & Voss & Co. | ABS | LUVOCOM® |
