Order Products : sales@su-jiao.com
Dryflex® 51331 SE
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tpCSDs_Dryflex-51331-SE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 51331 SE: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 50 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Natural Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Moderate (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 2781 |
| Molding Shrinkage | 0.75 - 2.0 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.80 | MPa | ISO 37 |
| Tensile Stress (Break) | 5.10 | MPa | ISO 37 |
| Tensile Elongation (Break) | 740 | % | ISO 37 |
| Tear Strength 1 | 21 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature 2 | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 210 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 180 - 210 | °C | |
| Mold Temperature | 15.0 - 40.0 | °C |
| Injection instructions |
|---|
| Can be processed without predrying when stored under normal conditions. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 210 | °C | |
| Cylinder Zone 2 Temp. | 150 - 210 | °C | |
| Cylinder Zone 3 Temp. | 150 - 210 | °C | |
| Cylinder Zone 4 Temp. | 150 - 210 | °C | |
| Cylinder Zone 5 Temp. | 150 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | C method: crescent sample |
| 2 . | Unstressed material |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SuperLite® SL551400-100 (3.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| Witcom PA66 8LC-HS | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| ALCOM® PC 740/4 GY1152-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Hapflex™ 599 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| ULTEM™ 2300F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
