Flexus 9212XP

Category: LLDPE , Linear Low Density Polyethylene
Manufacturer: Braskem
Trademark: Flexus
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: toPCph_Flexus-9212XP.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Braskem Flexus9212XP is a LLDPE hexene copolymer produced through metallocene catalyst which presents excellent impact and puncture strength, beyond a differential sealing performance comparing with another typical LLDPE. It contains a special package of slip additives which allow better CoF control after lamination.

Applications:
Films laminated for automatic packaging (FFS) of solids and liquids, co extrusion and general use.

Additive:
Slip package in high level
Blocking medium
Processing Aids Medium Level
General Information
Additive
  • Antiblock
  • Processing Aid
  • Slip
Features
  • Good Impact Resistance
  • Good Processing Stability
  • Hexene Comonomer
  • High Slip
  • Medium Antiblocking
  • Puncture Resistant
Uses
  • Film
  • General Purpose
  • Laminates
  • Packaging
Agency Ratings
  • FDA 21 CFR 177.1520
Processing Method
  • Blown Film
  • Extrusion Blow Molding
  • Film Extrusion
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.917g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)1.0g/10 minASTM D1238
FilmsNominal ValueUnitTest Method
Film Thickness - Tested 140µm
Tensile Strength ASTM D882
    MD : Break 35.0MPa
    TD : Break 25.0MPa
Tensile Elongation ASTM D882
    MD : Break 850%
    TD : Break 840%
Flexural Modulus ASTM D790
    1% Secant, MD 150MPa
    1% Secant, TD 160MPa
Dart Drop Impact > 850gASTM D1709
Elmendorf Tear Strength ASTM D1922
    MD 230g
    TD 790g
OpticalNominal ValueUnitTest Method
Gloss (60°)84ASTM D2457
Haze 7.0%ASTM D1003
Note Message
1 .Processed with 10% of LDPE in a 75mm screw diameter extruder with blow up ratio of 2.2:1
Resin Grade Manufacturer Category Trademark
TiGlaze™ ST Eastman Chemical Company Copolyester TiGlaze™
AKROMID® A3 GK 30 natural (3689) AKRO-PLASTIC GmbH Nylon 66 AKROMID®
Flontech® FT-GL25-NPA-6 Guarniflon S.p.A. - Flontech Division PTFE Flontech®
EPLAMID 6 CFR 50 NC EPSAN Plastik SAN. ve TiC. A.S. Nylon 6 EPLAMID 6
Kepital® F20-03 LOF KEP Americas Acetal (POM) Copolymer Kepital®