Order Products : sales@su-jiao.com

Prixene® EP005E50

Category:	HMWPE , High Molecular Weight Polyethylene
Manufacturer:	POLYMAT
Trademark:	Prixene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tnCzXG_Prixene-EP005E50.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Prixene® EP005E50 is a high molecular high density polyethylene copolymer grade specifically designed for blown film applications. This resin features are balance between toughness and stiffness, good impact properties with very low gel level. Typical applications are it can be used for producing heavy duty bags, grocery sacks, shopping bags, carrier- and T-shirt bags, and refuse bags, liners for multi-wall sacks and liners for frozen food meat. The features presented are good rigidity for thin gauge applications film. The product form is in pellets. HMW for blow film. The material complies with FDA regulation title 21.CFR177.1520.

Message

Prixene® EP005E50 is a high molecular high density polyethylene copolymer grade specifically designed for blown film applications. This resin features are balance between toughness and stiffness, good impact properties with very low gel level. Typical applications are it can be used for producing heavy duty bags, grocery sacks, shopping bags, carrier- and T-shirt bags, and refuse bags, liners for multi-wall sacks and liners for frozen food meat.

The features presented are good rigidity for thin gauge applications film.

The product form is in pellets. HMW for blow film. The material complies with FDA regulation title 21.CFR177.1520.

General Information
Features	Copolymer Good Impact Resistance High Molecular Weight High Rigidity Low Gel
Uses	Bags Film Heavy-duty Bags Liners
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.057	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Secant Modulus			ASTM D882
1% Secant, MD	793	MPa
1% Secant, TD	965	MPa
Tensile Strength			ASTM D882
MD : Yield	26.2	MPa
TD : Yield	23.4	MPa
MD : Break	58.6	MPa
TD : Break	34.5	MPa
Tensile Elongation			ASTM D882
MD : Break	300	%
TD : Break	420	%
Total Energy Impact	2.78	J	ASTM D4272

Resin Grade	Manufacturer	Category	Trademark
Reny® G07S	Mitsubishi Engineering-Plastics Corp	PARA	Reny®
Sanren DJ200 (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	LDPE	Sanren
NYLOY® UB-0010N G35N3N	Nytex Composites Co., Ltd.	Nylon, Unspecified	NYLOY®
Infino GP-3200G	SAMSUNG SDI CO., LTD.	ABS+PBT	Infino
Lytex 9063	Quantum Composites Inc.	Epoxy	Lytex