Order Products : sales@su-jiao.com
Alathon® H6012
| Category: | HDPE, MMW , High Density (MMW) Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tgEhU0_Alathon-H6012.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON H 6012 is medium molecular weight high density polyethylene homoopolymer for use in cast film applications. Typical applications for this resin include extrusion coating, blends with LDPE and laminations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| MD | 931 | MPa | ASTM D882 |
| TD | 1070 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 25.5 | MPa | ASTM D882 |
| TD : Yield | 31.7 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 850 | % | ASTM D882 |
| TD : Fracture | 350 | % | ASTM D882 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 177 | °C | |
| Take-Off Roll | 60.0 | °C |
| Extrusion instructions |
|---|
| Typical Extrusion Conditions1.0 mil Cast Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILAMID® B3 GF30 | Nilit Plastics | Nylon 6 | NILAMID® |
| PC-ABSCOM™ B200 | Polymer Compounders Limited | PC+ABS | PC-ABSCOM™ |
| Pibiflex® 5312 NAT | SO.F.TER. SPA | TPC-ET | Pibiflex® |
| Axiall PVC 6335 Clear 125 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| Enable™ 27-05HH | ExxonMobil Chemical | mPE | Enable™ |
