Order Products : sales@su-jiao.com
TAFMER™ A-4085
| Category: | PAO , Polyalphaolefin |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | TAFMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tfR8Ln_TAFMER-A-4085.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAFMER™A- 4085 is a polyα-olefin (PAO) material,. This product is available in North America,. TAFMER™The typical application field of A- 4085 is: food contact application |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 55.0 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric Strength | 55 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.10 | ASTM D150 | |
| Dissipation Factor | 1.3E-4 | ASTM D150 |
| Additional Information |
|---|
| Tensile Strength @ Break, JIS K 6301: 270 kgf/cm²Elongation @ Break, JIS K 6301: 800%Surface Hardness, JIS K 6301, A Scale: 83 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide RFB24 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| TORZEN® G3500HSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Ultra Low Outgassing™ SCV-2586 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Diakon® LH752 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| LNP™ LUBRICOMP™ DL002 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
