Order Products : sales@su-jiao.com
Caltex PP H240M
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | GS Caltex |
| Trademark: | Caltex PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tayRSg_Caltex-PP-H240M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Caltex PP H240M is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific for cast film. Primary attribute of Caltex PP H240M: Homopolymer. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.903 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.5 to 1.9 | % | |
| Across Flow | 1.5 to 1.9 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 36.3 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 10 | % | |
| Break | > 500 | % | |
| Flexural Modulus | 1470 | MPa | ASTM D790 |
| Coefficient of Friction | 0.70 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - MD | 873 | MPa | ASTM D882 |
| Seal Initiation Temperature | 150 | °C | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 26 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 124 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 0.50 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN601G15 | RJM International, Inc. | Nylon 66 | RJM |
| VESTAKEEP® Film 0FH90 | Evonik Industries AG | PEEK | VESTAKEEP® Film |
| Chemical Resources PMMA1200 | Chemical Resources, Inc. | Acrylic (PMMA) | Chemical Resources |
| Rotuba CAP CP811 | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
| POCAN® T 7141 000000 | LANXESS Corporation | PBT | POCAN® |
