Order Products : sales@su-jiao.com
INEOS HDPE TUB 121N
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ta4Akb_INEOS-HDPE-TUB-121N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TUB 121N is a natural bimodal high density polyethylene copolymer designed for extrusion of potable water, natural gas, industrial and mining pipe. When blended with an approved black concentrate, the resulting formulation ("TUB 121") is listed by the Plastics Pipe Institute (PPI TR-4, as both PE 4710 and PE 100) and is certified to ANSI/NSF Standard 14, CSA B137.1 and CSA B137.4. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 8.5 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | > 5000 | hr | ASTM D1693C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 24.1 | MPa | |
| Break | 30.3 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 10 | % | |
| Break | > 600 | % | |
| Flexural Modulus - 2% Secant | 896 | MPa | ASTM D790A |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.89 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (210°C) | > 20 | min | ASTM D3895 |
| Thermal Stability | > 240 | °C | ASTM D3350 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cell Classification | 445574C | ASTM D3350 | |
| Minimum Required Strength | 10.0 | MPa | ISO 9080 |
| PENT - Notch Tensile | > 10000 | hr | ASTM F1473 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 640 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 63.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WELLAMID Nylon 6600/50 GV 30 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| NYCOA Polyamide 2090 HS | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| AMTOPP PL30 | Inteplast Group | PP, Unspecified | AMTOPP |
| Lupoy® 1603-03 | LG Chem Ltd. | PC | Lupoy® |
| Mafill® CR CTE 6344 | Ravago Group | PP Copolymer | Mafill® |
