Order Products : sales@su-jiao.com
Alpha PVC GW 2052 SPEC NAT LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tUeGQh_Alpha-PVC-GW-2052-SPEC-NAT-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 60°C RATED, LEAD FREE BUFFERING COMPOUND INTENDED FOR OFNP AND OFNR CABLE CONSTRUCTIONS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 - 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 67 - 73 | ASTM D2240 | |
| Shaw D, 15 seconds | 53 - 59 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.762 mm | 22.8 | MPa | ASTM D412 |
| 1.91 mm | 20.7 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 280 | % | ASTM D412 |
| Fracture, 0.762mm | 250 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | UL Unspecified | ||
| 100°C, 168 hr 1 | -10 | % | UL Unspecified |
| 100°C, 168 hr 2 | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air | UL Unspecified | ||
| 100°C, 168 hr 3 | -20 | % | UL Unspecified |
| 100°C, 168 hr 4 | -10 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -10.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 2.85 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.018 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 32 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 | °C | |
| Cylinder Zone 2 Temp. | 171 | °C | |
| Cylinder Zone 3 Temp. | 177 | °C | |
| Cylinder Zone 4 Temp. | 182 | °C | |
| Cylinder Zone 5 Temp. | 182 | °C | |
| Adapter Temperature | 182 | °C | |
| Die Temperature | 182 | °C |
| Extrusion instructions |
|---|
| Screw Design: PVC metering, cored with water cooling. Screw water exit temperature of 100 degrees F.Note: To optimize physical properties, it is recommended to use hot water at 150 degrees F in the cooling trough; 3 to 1 draw down ratio. |
| Note Message | |
|---|---|
| 1 . | Thickness: 10 mil |
| 2 . | Thickness: 30 mil |
| 3 . | Thickness: 10 mil |
| 4 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LLDPE UN324 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| Exxtral™ Performance Polyolefin HMU404 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| KOCETAL® GF702BK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| MAJORIS EB730 | AD majoris | PP, Unspecified | MAJORIS |
| Sumiliteresin® PR-T-10 IP | SBHPP | Phenolic | Sumiliteresin® |
