Order Products : sales@su-jiao.com

NuSil CV9-1142

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tTHZqy_NuSil-CV9-1142.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: High Durometer, Low Density

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: High Durometer, Low Density

General Information
Features	High Hardness Low Density Low to No Outgassing
Uses	Adhesives Aerospace Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Tack Free Time	25.0	min

Additional Information	Nominal Value	Unit
Cure System	Oxime
Extrusion Rate	35.0	g/min

Uncured Properties	Nominal Value	Unit
Color	White
Density	0.818	g/cm³
Curing Time (23°C)	1.7E+2	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	55
Tensile Strength	2.76	MPa
Tensile Elongation at Break	85	%

Resin Grade	Manufacturer	Category	Trademark
SLOVAMID® 6 LI/1 LS	Plastcom	Nylon 6	SLOVAMID® 6
AIE PC/ABS A2200HF-T7	Asia International Enterprise (Hong Kong) Limited	PC+ABS	AIE PC/ABS
Crastin® SC164 NC010	DuPont Performance Polymers	PBT	Crastin®
CERTENE™ LLHR-735U	Muehlstein	MDPE	CERTENE™
XYLEX™ X5230 resin	SABIC Innovative Plastics Asia Pacific	PC+PET	XYLEX™