Order Products : sales@su-jiao.com
Generic PS (Specialty)
| Category: | PS (Specialty) , Specialty Polystyrene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tRGGCz_Generic-PS-Specialty-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PS (Specialty) This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 - 1.21 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.8 - 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 15.0 - 27.2 | MPa | ASTM D638 |
| 23°C | 22.0 - 53.4 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Fracture, 23°C | 3.6 - 41 | % | ASTM D638 |
| Fracture, 23°C | 2.0 - 30 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 1290 - 22000 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 20.0 - 63.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 11 - 100 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 14 - 330 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 71.0 - 81.0 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 88.9 - 103 | °C | ASTM D1525 |
| -- | 83.0 - 105 | °C | ISO 306 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+4 - 2.5E+11 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.0E+4 - 2.5E+12 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 219 - 220 | °C | |
| Mold Temperature | 44.8 - 50.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PS (Specialty)This information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 220 - 230 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PS (Specialty)This information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4200 | RTP Company | PI, TP | RTP |
| Trexprene® A80BI | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| NEFTEKHIM PP 4242N (EP2X29GK) | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| Durethan® BM 40 X H2.0 EF 900116 | LANXESS GmbH | Nylon 6 | Durethan® |
| Sylvin 8621-60 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
