Order Products : sales@su-jiao.com
HIVOREX BL5200
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | HIVOREX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tQZUb0_HIVOREX-BL5200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIVOREX BL5200 is produced by slurry process technology. This resin is ideally suited for use in blow molding application. HIVOREX BL5200 is designed to offer high stiffness, excellent impact resistance, good resistance at low temp and chemicals resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 30.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 540 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA66 A 2030/500 GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| GAPEX® RPP40EA28BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| Edgetek™ COC BLEND-15GF Natural | PolyOne Corporation | COC | Edgetek™ |
| Hax™ HFX 509 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| LNP™ LUBRICOMP™ RX03643H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
