Order Products : sales@su-jiao.com
Sinvicomp SIZ4809
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tQGMlE_Sinvicomp-SIZ4809.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SINVICOMP SIZ4809 is a rigid polyvinyl chloride material,. This product is available in the Asia-Pacific region and is processed by extrusion. The main features of SINVICOMP SIZ4809 are: ROHS certification. The typical application field of SINVICOMP SIZ4809 is: wire and cable |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Changes in mechanical properties after hot air aging test, 168 hr 1 | IEC 60811 | ||
| Tensile strength change | 10 | % | IEC 60811 |
| Change in tensile elongation | 20 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal deformation- @ 120°C for 1 hr | 15 | % | BS 6746 |
| Thermal stability- Congo Red (190°C) | > 1 | hr | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Loss of Mass - Oven Ageing Condition @ 100 ± 2°C for 7 days 2 | 1.70 | mg/cm² | IEC 811-3-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 2.0E+14 | ohms·cm | BS 2782 230A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Typical temperature profile for SINVICOMP compound is from 160°C to 180°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 160°CCompression zone: 160°C~170°CMixing zone: 170°C~180°CNozzle/Die Zone: 180°C |
| Note Message | |
|---|---|
| 1 . | @ 100 ± 2°C |
| 2 . | Method: IEC60811-3-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nylfor® A2 GF/50 NATURALE | SO.F.TER. SPA | Nylon 66 | Nylfor® |
| ALCUDIA® LDPE 2805F | REPSOL | LDPE | ALCUDIA® LDPE |
| Arlon® 45NK | Arlon-MED | Epoxy | Arlon® |
| Chemlon® 500 | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| NYLOY® KF-0010N 6121W1 | Nytex Composites Co., Ltd. | Nylon 6 | NYLOY® |
