Order Products : sales@su-jiao.com
DISTRUMID 6 GF30 HI
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Distrupol |
| Trademark: | DISTRUMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tNH3YX_DISTRUMID-6-GF30-HI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DISTRUMID 6 GF30 HI is a polyamide 6 (nylon 6) material, which contains a 30% glass fiber reinforced material. This product is available in Europe, and the processing method is injection molding. The main features of DISTRUMID 6 GF30 HI are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.34 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.25 - 0.50 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 9300 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, 23°C) | 160 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 4.0 | % | ISO 527-2/5 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 215 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 200 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 210 | °C | ISO 306/B50 |
| Melting Temperature (DSC) | 220 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | 500 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | HB | UL 94 |
| Additional Information |
|---|
| Mold Shrinkage, ISO 2577, 23°C: 0.25 to 0.5 %Melting Point, DSC: 220 ± 2 °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 - 95.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 240 - 270 | °C | |
| Mold Temperature | 90.0 - 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP WPP331 | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Exxtral™ Performance Polyolefin BMU131 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| DOMAMID® 66GB305H | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Rotuba CAP CP801 (8% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
| Sylvin 9067-90 RED 6114 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
