| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tLo1VT_Mytex-AS33L-W--06.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| AS33L(W-06 is a compounded, talc, and rubber modifi ed polypropylene fof exterior automotive applications. Material has outstanding moldability and excellent balance of high stiffness and good impact pedormance propedies. Available in generic or customer specific pre-colored versions with or without weathefing and/or scfatch additives. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 28 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 50 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 20.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® MA 4430 | Arkema | Nylon 12 | Rilsan® |
| SumiDurez 150 | SumiDurez Singapore Pte Ltd | Phenolic | SumiDurez |
| Hylex® P1025 L2 HB | Entec Polymers | PC | Hylex® |
| LIHAN® B7010 | Nanjing Lihan Chemical Co., Ltd. | Nylon 6 | LIHAN® |
| Plenco 07507 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |