Order Products : sales@su-jiao.com
GERMAMID 6 GF 10 H
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Kunststoff-Kontor-Hamburg GmbH |
| Trademark: | GERMAMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tIRnoR_GERMAMID-6-GF-10-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GERMAMID 6 GF 10 H is a polyamide 6 (nylon 6) material, and the filler is 10% glass fiber reinforced material. This product is available in Europe,. The main characteristics of GERMAMID 6 GF 10 H are: heat stabilizer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.50 - 1.5 | % | ISO 294-4 |
| Water Absorption (Saturation, 23°C) | 2.3 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5800 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 25 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 | °C | ISO 75-2/A |
| Melting Temperature | 218 | °C | |
| Thermal Conductivity | 0.21 | W/m/K | ISO 8302 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Additional Information |
|---|
| Maximum Use Temperature, 20000 hr: 100°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MAXBATCH YT-818.G001-1000 | PolyOne Corporation | HDPE | Maxxam™ |
| Dynaprene® VE0073A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
| Grilamid® L 20 W 20 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Iupilon® RS-3001R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| OTECH PVC OW734 - Cord Insulation | OTECH Corporation | PVC, Unspecified | OTECH PVC |
