Order Products : sales@su-jiao.com
MAJORIS DT300E - 9432
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tGh7lC_MAJORIS-DT300E---9432.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DT300E - 9432 is a 30% mineral filled polyethylene high density compound intended for injection moulding. The product is available in black DT300E - 8229) and natural (DT300E) but other colours can be provided on request. APPLICATIONS DT300E - 9432 is intended for components which require rigidity and dimensional stability. Suitable applications are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3300 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 28.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 2150 | MPa | ISO 178 |
| Flexural Stress | 46.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 42 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 112 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 66.0 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 200 | °C | |
| Processing (Melt) Temp | 190 - 230 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 A TFE 18 SI 2 | RTP Company | Nylon 6 | RTP |
| RTP 399 X 93608 | RTP Company | PC | RTP |
| REVOLVE® N-109 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| Nipol® AR 74X | Zeon Corporation | Rubber | Nipol® AR |
| LTP PC7125 | Chengdu Letian Plastics Co., Ltd | TP, Unspecified | LTP |
