Order Products : sales@su-jiao.com
Comco PVDF
| Category: | PVDF , Polyvinylidene Fluoride |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tGfEpg_Comco-PVDF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PVDF is a Polyvinylidene Fluoride (PVDF) material. It is available in Europe. Primary attribute of Comco PVDF: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.79 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation, 23°C | 0.050 | % | |
| Equilibrium, 23°C, 50% RH | 0.050 | % | |
| Water Absorption | ISO 62 | ||
| after 24 h immersion in water : 23°C | 1.0 | mg | |
| after 96 h immersion in water : 23°C | 3.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Service Temperature | |||
| in air continuosly | 150 | °C | |
| in air for short periods | 160 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 75 | ISO 2039-2 | |
| Ball Indentation Hardness | 110 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2300 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 20 | % | ISO 527-2 |
| Compressive Stress | ISO 604 | ||
| 2% Strain | 32.0 | MPa | |
| 1% Strain | 17.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 75.0 | °C | ISO 75-2/A |
| Melting Temperature | 175 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 1.3E-4 | cm/cm/°C | |
| 23 to 100°C | 1.5E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.19 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength | 18 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 7.40 | ||
| 1 MHz | 6.00 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 0.025 | ||
| 1 MHz | 0.17 | ||
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 | ||
| Oxygen Index | 44 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1309 | RTP Company | PPS | RTP |
| TOPAS® 6015S-04 | Topas Advanced Polymers, Inc. | COC | TOPAS® |
| FILLMA 5002F30A | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | FILLMA |
| Electrafil® PA6 GF30 AS BK | Techmer Engineered Solutions | Nylon 6 | Electrafil® |
| Sylvin 8996-75 FU Brown 7260 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
