Order Products : sales@su-jiao.com

Grivory® XE 4101 black 9225

Category:	Nylon 10T/X , Polyamide 10T/X Copolymer
Manufacturer:	EMS-GRIVORY
Trademark:	Grivory®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tEf4ga_Grivory-XE-4101-black-9225.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Grivory® XE 4101 black 9225 is a Polyamide 10T/X Copolymer (Nylon 10T/X) material filled with 40% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.

Important attributes of Grivory® XE 4101 black 9225 are:

Flame Rated

Chemical Resistant

Eco-Friendly/Green

Good Mold Release

Heat Resistant

Typical applications include:

Plumbing/Piping/Potable Water

Electrical/Electronic Applications

Food Contact Applications

Appliances

Household Applications

General Information
Filler / Reinforcement	Glass Fiber, 40% Filler by Weight
Features	Alcohol Resistant Aromatic Good Flow Good Mold Release High Heat Resistance Hydrolysis Resistant Renewable Resource Content
Uses	Appliance Components Connectors Electrical/Electronic Applications Household Goods Power/Other Tools
Agency Ratings	ACS Unspecified Rating DVGW W270 EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating KTW Unspecified Rating NSF 51 NSF 61 WRAS Unspecified Rating
Appearance	Black
Forms	Granules
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1.49	--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.90	--	%
Flow	0.50	--	%
Water Absorption				ISO 62
Saturation, 23°C	2.0	--	%
Equilibrium, 23°C, 50% RH	0.90	--	%

Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness	220	230	MPa	ISO 2039-1

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	13000	13000	MPa	ISO 527-2
Tensile Stress (Break)	190	175	MPa	ISO 527-2
Tensile Strain (Break)	2.8	2.6	%	ISO 527-2

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	9.0	8.0	kJ/m²
23°C	10	10	kJ/m²
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	80	70	kJ/m²
23°C	85	75	kJ/m²

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
1.8 MPa, Unannealed	265	--	°C	ISO 75-2/A
8.0 MPa, Unannealed	190	--	°C	ISO 75-2/C
Maximum Use Temperature				Internal Method
Long Term	150	--	°C
Short Term	250	--	°C

Additional Information	Dry	Conditioned		Test Method
ISO Type	PA 10T/X, MH, 18-120, GF40	--		ISO 1874

Thermal	Dry	Conditioned	Unit	Test Method
Melting Temperature ¹	295	--	°C	ISO 11357-3
CLTE				ISO 11359-2
Flow	2.0E-5	--	cm/cm/°C
Transverse	7.0E-5	--	cm/cm/°C

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+11	ohms	IEC 60093
Volume Resistivity	1.0E+12	1.0E+12	ohms·cm	IEC 60093
Electric Strength	32	31	kV/mm	IEC 60243-1
Comparative Tracking Index	--	600	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.800 mm)	HB	--		IEC 60695-11-10, -20

Note Message
1 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
BESTNYL SE50VI02AH	Triesa Plastics	Nylon 66	BESTNYL
AvaSpire® AV-722	Solvay Specialty Polymers	PAEK	AvaSpire®
INSTRUC PPGF20CC	Infinity LTL Engineered Compounds	PP, Unspecified	INSTRUC
KEBAFORM® C 50.0	BARLOG plastics GmbH	Acetal (POM) Copolymer	KEBAFORM® C
Durethan® BKV 50 H2.0 EF DUS030 901510	LANXESS Corporation	Nylon 6	Durethan®