Order Products : sales@su-jiao.com
Elastron® G G400.A80.N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Elastron USA, Inc. |
| Trademark: | Elastron® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tEV2CA_Elastron-G-G400-A80-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good scratch and abrasion resistance is required. Bondable to: PP, EVA, PE |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 2.0 | % | |
| Across Flow | 1.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion | 50 | mm³ | ASTM D1630 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance - Stressed | No Cracks | ASTM D518 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 3.10 | MPa | |
| 300% Strain | 4.50 | MPa | |
| Tensile Strength (Break) | 12.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 850 | % | ASTM D412 |
| Tear Strength | 50.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 28 | % | |
| 70°C, 22 hr | 55 | % | |
| 100°C, 22 hr | 72 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 155 to 175 | °C | |
| Middle Temperature | 165 to 185 | °C | |
| Front Temperature | 175 to 195 | °C | |
| Nozzle Temperature | 195 to 225 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ STM1500 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| 4POM® 23I10000 | 4Plas | Acetal (POM) Homopolymer | 4POM® |
| LARIPUR® LPR 9025 | COIM S.p.A. | TPU-Polyester | LARIPUR® |
| Sylvin 2900-80 Clear Red 6282 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ LUX7430C resin | SABIC Innovative Plastics | PC | LEXAN™ |
