Order Products : sales@su-jiao.com
INEOS HDPE TUB 121
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t7c01e_INEOS-HDPE-TUB-121.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TUB 121 is a black bimodal high density polyethylene copolymer designed for water, natural gas, industrial, and mining pipe and fittings. TUB 121 is listed by the Plastics Pipe Institute (in PPI TR-4, as both PE 4710 and PE 100) and is certified to ANSI/NSF Standard 14, CSA B137.1 and CSA B137.4. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Black | 0.959 | g/cm³ | ASTM D792 |
| -- 1 | 0.949 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 8.0 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | > 5000 | hr | ASTM D1693B |
| Carbon Black Content | 2.3 | % | ASTM D1603 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | ASTM D638 | ||
| Yield | 24.1 | MPa | |
| Break | 32.4 | MPa | |
| Tensile Elongation 3 | ASTM D638 | ||
| Yield | 9.5 | % | |
| Break | > 600 | % | |
| Flexural Modulus - 2% Secant | 931 | MPa | ASTM D790A |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.89 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (210°C) | > 20 | min | ASTM D3895 |
| Thermal Stability | > 240 | °C | ASTM D3350 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cell Classification | 445574C | ASTM D3350 | |
| Minimum Required Strength | 10.0 | MPa | ISO 9080 |
| PENT - Notch Tensile | > 10000 | hr | ASTM F1473 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 640 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 12.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Natural |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D221 | Polykemi AB | PBT | POLYshine |
| Alcryn® 2070 BK | Advanced Polymer Alloys | MPR | Alcryn® |
| Sylvin 83052-90 White 1592 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Plexar® PX3184 | LyondellBasell Industries | LLDPE | Plexar® |
| Sylvin 5104 Yellow 4191 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
