Order Products : sales@su-jiao.com
ADDILENE H 526 N30
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | ADDIPLAST |
| Trademark: | ADDILENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t7L7CY_ADDILENE-H-526-N30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADDILENE H 526 N30 is a Polypropylene Homopolymer (PP Homopolymer) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Primary attribute of ADDILENE H 526 N30: Wear Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 74 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 28.0 | MPa | |
| Break | 24.0 | MPa | |
| Tensile Strain (Break) | 20 | % | ISO 527-2 |
| Flexural Modulus | 2600 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 29 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength | 3.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 74.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 153 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 165 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULABLEND® (PA/PP) M/MO | A. Schulman Europe | Nylon+PP | SCHULABLEND® |
| Ultramid® A3EG7 FC | BASF Corporation | Nylon 66 | Ultramid® |
| Epocast 1610-A1 | Huntsman Advanced Materials | Epoxy | Epocast |
| Kemcor LD 6200 | Qenos Pty Ltd | LDPE | Kemcor |
| Comco PA6G GLASS | Comco Nylon GmbH | Nylon 6 | Comco |
