POLYfill PPC T1020

Category: PP Copolymer , Polypropylene Copolymer
Manufacturer: Polykemi AB
Trademark: POLYfill
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: t6lWGl_POLYfill-PPC-T1020.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Mineral reinforced
General Information
Filler / Reinforcement
  • Mineral, 20% Filler by Weight
PhysicalNominal ValueUnitTest Method
Density 1.04g/cm³ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)1.0g/10 minISO 1133
Molding Shrinkage ISO 294-4
    Across Flow 1.0 to 1.3%
    Flow 1.0 to 1.3%
MechanicalNominal ValueUnitTest Method
Tensile Stress 23.0MPaISO 527-2
Tensile Strain (Yield)8.0%ISO 527-2
Flexural Modulus (23°C)1800MPaISO 178
Flexural Stress 35.0MPaISO 178
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength ISO 179
    -20°C 10kJ/m²
    23°C 15kJ/m²
ThermalNominal ValueUnitTest Method
Heat Deflection Temperature 1
    0.45 MPa, Unannealed 110°CISO 75-2/B
    1.8 MPa, Unannealed 60.0°CISO 75-2/A
Vicat Softening Temperature
    -- 138°CISO 306/A50
    -- 56.0°CISO 306/B50
FlammabilityNominal ValueUnitTest Method
Flame Rating (1.60 mm)HBUL 94
Glow Wire Ignition Temperature (2.00 mm)750°CIEC 60695-2-13
Note Message
1 .120°C/hr
Resin Grade Manufacturer Category Trademark
Riblene® FF 29 Versalis S.p.A. LDPE Riblene®
Braskem PE GM 7746 C Braskem HDPE Braskem PE
Cheng Yu NG1500S Cheng Yu Plastic Company Limited Nylon 66 Cheng Yu
EverGlide® MB1550 Polymer Dynamix PET EverGlide®
LUVOCOM® 1105-8167 Lehmann & Voss & Co. PEEK LUVOCOM®