Order Products : sales@su-jiao.com
MTEGRITY™ LDPE LD127AM
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | t3vGzT_MTEGRITYLDPELD127AM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Low Density Polyethylene
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.919 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD | 200 | MPa | ASTM D882 |
| 1% secant, TD | 245 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 25.5 | MPa | ASTM D882 |
| TD : Yield | 19.3 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 150 | % | ASTM D882 |
| TD : Fracture | 500 | % | ASTM D882 |
| Dart Drop Impact (38 µm) | 150 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 330 | g | ASTM D1922 |
| TD : 38 µm | 150 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 38.1 µm) | 45 | ASTM D2457 | |
| Haze (38.1 µm) | 15 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SMOKEGUARD™ O 204 NATURAL | AlphaGary | Polyolefin, Unspecified | SMOKEGUARD™ O |
| NITRIFLEX NTL-271 | NITRIFLEX | SBR, Unspecified | NITRIFLEX |
| ADMER™ NF908A | Mitsui Chemicals America, Inc. | PE, Unspecified | ADMER™ |
| Hytrel® SC988 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| POCAN® KU 1-7301 000000 | LANXESS Corporation | PBT | POCAN® |
